With roofing it is always important to look at the type of roof, do you go for a flat roof or a sloping roof? This is also easier when covering a roof. Below you can read what kind of roofs there are and what the characteristics are of this kind of roof. These characteristics are the insulation options, price, benefits and the roof covering that you can use best on this roof. You will need the roofing sacramento service for the same now.
A flat roof is one of the easiest roofs. This is because the roof is only a horizontal plane. But the roof is never completely flat. It always has a small slope. This small slope ensures that the rainwater can easily run away from the roof. When the slope is greater than 15 degrees, there is a lectern roof. The benefits of a flat roof are:
A flat roof is not sensitive to wind. This is because the wind can easily slide over it and therefore does not bump into it.
- A flat roof looks very nice and sleek.
- Solar panels can easily be placed on a flat roof.
- It is very easy to install a flat roof.
Roof covering with a flat roof
The roof coverings that fit well with a flat roof are bitumen, PVC and EPDM. Bitumen is also called roofing and EPDM is synthetic rubber. All the materials are very good, so it doesn’t matter which one you choose. PVC comes in many colors, it is recommended to choose gray. This is because the other colors have a large chance of discoloring. Then your roof will not look stylish after a while. Bitumen and EPDM are easy to maintain and have a good price-quality ratio.
- A Bitumen roof costs on average between $ 40 and $ 50 per square meter and lasts between 20 and 30 years.
- An EPDM roof costs on average between $ 50 and $ 80 per square meter, but lasts longer: 40 – 50 years.
- A PVC roof costs on average between $ 45 and $ 80 per square meter and lasts between 20 and 30 years.
A gable roof is actually the classic under the roofs. This is because a gable roof fits very many architectural styles and is therefore used a lot. The gable roof comes in various forms. The simplest form consists of two surfaces that face each other, the roof that all children draw and looks like an inverted V. The angle of inclination of a saddle roof must be at least 15 degrees, but you can make it as stylish as you want. Two gutters must always be located on a gable roof. The benefits of a gable roof are:
- A gable roof is wind resistant.
- A gable roof has good drainage of rainwater.
- The steeper the roof, the more living space comes underneath.
There are three ways to insulate a flat roof:
Warm flat roof: The insulation is placed outside here. It is then laid outside and then the roof covering is added.
Cold flat roof: The insulation is placed through this inside. It is then laid under the roof boarding, but this works less well than via outside.
Inverted roof: The insulation is placed through the outside. It is then laid on the roof covering. This is especially the case with renovations.